1100 Aluminum Checkered Plate
5 Bars aluminum 1100-H14 checkered plate: refers to H14 tempered 1100 aluminum checker plate with 5 bars surface patterns.
It is easy to bend, installation, lightweight, more anti slip and low cost.
It is the regular product we are dealing with.
1100 Aluminum Checkered Plate
Chemical and physical properties
ALLOY | Si | Fe | Cu | Mn | Mg | Zn | Ti | Others | Al | |
Single | Total | |||||||||
1100 | 0.95 | 0.05-0.2 | 0.05 | / | 0.1 | / | 0.05 | 0.15 | 99.00 |
Alloy | Temper | Thickness | Tensile strength | Yield strength | Elongation rate % | Bending radius | |
mm | Rb/MPa | Rp0.2/MPa | A50mm | A5.65° | |||
1100 | O | >0.2-0.3 | ≥75-105 | ≥25 | 15 | 0t | |
>0.3-0.5 | 17 | 0t | |||||
>0.5-1.5 | 22 | 0t | |||||
>1.5-6.0 | 30 | 0t | |||||
>6.0-80.0 | 28 | 25 | 0t | ||||
H12/H22 | >0.2-0.5 | ≥95-130 | ≥75 | 3 | 0t | ||
>0.5-1.5 | 5 | 0t | |||||
>1.5-6.0 | 8 | 0t | |||||
H14/H24 | >0.2-0.3 | ≥110-145 | ≥95 | 1 | 0t | ||
>0.3-0.5 | 2 | 0t | |||||
>0.5-1.5 | 3 | 0t | |||||
>1.5-4.0 | 5 | 0t | |||||
H16/H26 | >0.2-0.3 | ≥130-165 | ≥115 | 1 | 2t | ||
>0.3-0.5 | 2 | 2t | |||||
>0.5-1.5 | 3 | 2t | |||||
>1.5-4.0 | 4 | 2t | |||||
H18 | >0.2-0.5 | ≥150 | 1 | ||||
>0.5-1.5 | 2 | ||||||
>1.5-3.0 | 4 | ||||||
H112 | >6.0-12.5 | ≥90 | ≥50 | 9 | |||
>12.5-40.0 | ≥85 | ≥40 | 12 | ||||
>40.0-80.0 | ≥80 | ≥30 | 18 | ||||
F | >2.5-150.0 |
1100 Aluminum Checkered Plate
Our packing meets the sea export standard.
PE/PVC protective film or white paper could be covered as customer’s need.
Special requirements of packing could be negotiate before order.
1100 Aluminum Checkered Plate
It is widely used as Indoor and outdoor decoration, flooring, stairs, construction, deck etc.
© 2022 Zhejiang Yonghong New Material Co., Ltd.