7075 aluminum plate
7075 aluminum plate (Al-Zn-Mg-Cu) belongs to super-hard aluminum.
As a kind of cold finished wrought alloy, it has great strength and hardness. It’s far better than mild steel. This alloy has good mechanical properties and anode reaction.
7075 aluminum plate as a typical kind of aerospace aluminum alloy material is usually used for high-end fields.
7075 aluminum plate
Chemial property
Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other | Al | |
Single | Total | ||||||||||
7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | 5.1-6.1 | 0.2 | 0.05 | 0.15 | Re |
Physical property
Alloy | Temper | Thickness | Tensile strength | Yield strength | Elongation rate% | Bending radius | |
mm | RbMPa | Rp0.2/MPa | A5.65 | A50mm | |||
7075 | O | 0.5-1.6 | ≤250 | ≤140 | 10 | ||
1.6-10.0 | ≤270 | ≤145 | 9 | ||||
T6 | 0.5-1.0 | 485 | 415 | 7 | |||
>1.0-1.6 | 495 | 425 | 8 | ||||
>1.6-6.5 | 505 | 435 | |||||
>6.5-10.0 | 515 | 445 | 8 | ||||
F | >6.0-100 | ||||||
H112 | 4.5-6.5 | 515 | 440 | 8 | |||
>6.5-12.5 | 515 | 445 | 9 | ||||
>12.5-25.0 | 540 | 470 | |||||
>25.0-40.0 | 530 | 460 | |||||
T62 | 0.5-1.0 | 485 | 415 | 7 | |||
>1.0-1.6 | 495 | 425 | 8 | ||||
>1.6-4.5 | 505 | 435 | 8 | ||||
>4.5-6.5 | 515 | 440 | 8 | ||||
>6.5-12.5 | 515 | 445 | 9 | ||||
>12.5-25.0 | 540 | 470 | - | ||||
>25.0-40.0 | 530 | 460 | - |
7075 aluminum plate
Our packing meets the sea export standard.
PE/PVC protective film or white paper could be covered as customer’s need.
Special requirements of packing could be negotiate before order.
7075 aluminum plate
Ii is widely used as the manufacture of aircraft structures and other high-stress structures with high strength and corrosion resistance, such as upper and lower wing panels, trusses and spacers. In addition, it is also used to make high-end mobile phone casings, precision components, golf components and other products.
The medium thick 7075 aluminum plate is suitable for high hardness mold, shoe mold, heavy forging, high strength parts and other fields.
© 2022 Zhejiang Yonghong New Material Co., Ltd.