1050 Aluminum Sheet

1050 aluminum sheet

1050 aluminum sheet belongs to commercially pure wrought family with a purity of 99.5% Aluminum. Except Al, 0.4% of Fe is added to 1050 aluminum sheet, thus, it has high electrical conductivity.

1000 series aluminum group offers the best correction resistance compared to any alloy group, so does the 1050 aluminum sheet.

1050 aluminum sheet

ALLOY	Si	Fe	Cu	Mn	Mg	Zn	Ti	Others		Al
								Single	Total
1050	0.25	0.4	0.05	0.05	0.05	0.05	0.03	0.03		99.50

Alloy	Temper	Thickness	Tensile strength	Yield strength	Elongation rate %		Bending radius
Alloy	Temper	mm	Rb/MPa	Rp0.2/MPa	A50mm	A5.65°	Bending radius
1050	O	＞0.2-0.5	≥60-100		15		0t
		＞0.5-0.8			20		0t
		＞0.8-1.5		≥20	25		0t
		＞1.5-6.0			30		0t
		＞6.0-50.0			28	28
	H12/H22	＞0.2-0.3	≥80-120		2		0t
		＞0.3-0.5			3		0t
		＞0.5-0.8			4		0t
		＞0.8-1.5		≥65	6		0.5t
		＞1.5-3.0			8		0.5t
		＞3.0-6.0			9		0.5t
	H14/H24	＞0.2-0.3	≥95-130	-	1		0.5t
		＞0.3-0.5			2		0.5t
		＞0.5-0.8			3		0.5t
		＞0.8-1.5		≥75	4		1.0t
		＞1.5-3.0			5		1.0t
		＞3.0-6.0			6		1.0t
	H16/H26	＞0.2-0.6	≥120-150		1		2.0t
		＞0.6-0.8		≥85	2		2.0t
		＞0.8-1.5			3		2.0t
		＞1.5-4.0			4		2.0t
	H18	＞0.2-0.5	≥130		1
		＞0.5-0.8			2
		＞0.8-1.5			3
		＞1.5-3.0			4
	H112	＞4.5-6.0	≥85	≥45	10
		＞6.0-12.5	≥80	≥45	10
		＞12.5-25.0	≥70	≥35		16
		＞25.0-50.0	≥65	≥30		22
		＞50.0-75.0	≥65	≥30		22
	F	＞2.5-150.0

1050 aluminum sheet

All of our package meets the export standard.

Besides, PE/PVC protective film or white paper could be covered as customer’s need.

And special requirements of packing could be negotiate before order.

aluminum sheet

1050 aluminum sheet

1050 aluminum sheet has high ductility and high reflective finish.

Besides, 1050 aluminum sheet is non-heat treatment series is produced in extruded sections.

It has excellent cold work ability, braze-ability and solder-ability, and it is strengthened by cold working.

However, 1050 aluminum sheet has low mechanical strength compared to more significantly alloyed metals.

All of these characteristics make 1050 aluminum sheet well suited to chemical and electrolytic brightening but not in casting.

Last but not least, moderate strength and good anodizing quality enables our products has a vast application.

aluminum application

QUICK LINK

PRODUCTS CENTER

PRODUCTS CENTER

Availability:



Inquire Add to Basket