WhatsApp: +86 15868431311 E-mail: info@yhaluminum.com Tel: +86 571-88223223 / 571-86717075
5083 aluminum sheet
GRADE: 5000SERIES
TEMPER: O-H112, H321, H116
THICKNESS: 0.8-200MM
WIDTH: UNDER 2650MM
STANDARD: GB/T, ASTM, EN, DIN , DNV, CCS
Availability: | |
---|---|
5083 aluminum sheet
5083 aluminum sheet we use the finest raw material to improve the product quality, and we are certificated to CCS (China Classification Society) and DVN GL (Norske Veritas), guaranteeing the quality of our 5083 aluminum sheet lives to national standards.
We can manufacture 5083 aluminum sheet with many tempers, such as O, H32, H34, H112, H116, H321, etc., and it can be cut to size at customers’ need.
5083 aluminum sheet
5083 aluminum sheet we use the finest raw material to improve the product quality, and we are certificated to CCS (China Classification Society) and DVN GL (Norske Veritas), guaranteeing the quality of our 5083 aluminum sheet lives to national standards.
We can manufacture 5083 aluminum sheet with many tempers, such as O, H32, H34, H112, H116, H321, etc., and it can be cut to size at customers’ need.
5083 aluminum sheet
1, Chemical and physical properties
chemical composition (%) max | ||||||||
Si | Fe | Cu | Mn | Mg | Cr | Zn | Al | |
5083 | 0.4 | 0.4 | 0.1 | 0.4-1 | 4.0-4.9 | 0.05-0.25 | 0.25 | remain |
Physical specificatiom(min)
Alloy | Temper | Thickness | Tensile strength | Yield strength | Elongation rate % | Bending radius | |
mm | Rb/MPa | Rp0.2/MPa | A50mm | A5.65° | |||
5083 | O/H111 | >0.2-0.5 | ≥275-350 | ≥125 | 11 | 0.5t | |
>0.5-1.5 | 12 | 1.0t | |||||
>1.5-3.0 | 13 | 1.0t | |||||
>3.0-6.0 | 15 | 1.5t | |||||
>6.0-12.5 | 16 | 2.5t | |||||
>12.5-50 | 15 | ||||||
>50-80 | ≥270-345 | ≥115 | 14 | ||||
H12 | >0.2-0.5 | ≥315-375 | ≥250 | 3 | |||
>0.5-1.5 | 4 | ||||||
>1.5-3.0 | 5 | ||||||
>3.0-6.0 | 6 | ||||||
H14 | >0.2-0.5 | ≥340-400 | ≥280 | 2 | |||
>0.5-1.5 | 3 | ||||||
>1.5-3.0 | 3 | ||||||
>3.0-6.0 | 3 | ||||||
H16 | >0.2-0.5 | ≥360-420 | ≥300 | 1 | |||
>0.5-1.5 | 2 | ||||||
>1.5-3.0 | 2 | ||||||
>3.0-4.0 | 2 | ||||||
H22/H32 | >0.2-0.5 | ≥305-380 | ≥215 | 5 | 0.5t | ||
>0.5-1.5 | 6 | 1.5t | |||||
>1.5-3.0 | 7 | 2.0t | |||||
H22/H32 | >3.0-6.0 | ≥305-380 | ≥215 | 8 | 2.5t | ||
H24/H34 | >0.2-0.5 | ≥340-400 | ≥250 | 4 | 1.0t | ||
>0.5-1.5 | 5 | 2.0t | |||||
>1.5-3.0 | 6 | 2.5t | |||||
>3.0-6.0 | 7 | 3.5t | |||||
H26/H36 | >0.2-0.5 | ≥360-420 | ≥280 | 2 | |||
>0.5-1.5 | 3 | ||||||
>1.5-3.0 | 3 | ||||||
>3.0-4.0 | 3 | ||||||
H112 | >6.0-12.5 | ≥275 | ≥125 | 12 | |||
>12.5-40 | ≥275 | ≥125 | 10 | ||||
>40-50 | ≥270 | ≥115 | 10 | ||||
F | >4.5-150 |
5083 aluminum sheet
1, Chemical and physical properties
chemical composition (%) max | ||||||||
Si | Fe | Cu | Mn | Mg | Cr | Zn | Al | |
5083 | 0.4 | 0.4 | 0.1 | 0.4-1 | 4.0-4.9 | 0.05-0.25 | 0.25 | remain |
Physical specificatiom(min)
Alloy | Temper | Thickness | Tensile strength | Yield strength | Elongation rate % | Bending radius | |
mm | Rb/MPa | Rp0.2/MPa | A50mm | A5.65° | |||
5083 | O/H111 | >0.2-0.5 | ≥275-350 | ≥125 | 11 | 0.5t | |
>0.5-1.5 | 12 | 1.0t | |||||
>1.5-3.0 | 13 | 1.0t | |||||
>3.0-6.0 | 15 | 1.5t | |||||
>6.0-12.5 | 16 | 2.5t | |||||
>12.5-50 | 15 | ||||||
>50-80 | ≥270-345 | ≥115 | 14 | ||||
H12 | >0.2-0.5 | ≥315-375 | ≥250 | 3 | |||
>0.5-1.5 | 4 | ||||||
>1.5-3.0 | 5 | ||||||
>3.0-6.0 | 6 | ||||||
H14 | >0.2-0.5 | ≥340-400 | ≥280 | 2 | |||
>0.5-1.5 | 3 | ||||||
>1.5-3.0 | 3 | ||||||
>3.0-6.0 | 3 | ||||||
H16 | >0.2-0.5 | ≥360-420 | ≥300 | 1 | |||
>0.5-1.5 | 2 | ||||||
>1.5-3.0 | 2 | ||||||
>3.0-4.0 | 2 | ||||||
H22/H32 | >0.2-0.5 | ≥305-380 | ≥215 | 5 | 0.5t | ||
>0.5-1.5 | 6 | 1.5t | |||||
>1.5-3.0 | 7 | 2.0t | |||||
H22/H32 | >3.0-6.0 | ≥305-380 | ≥215 | 8 | 2.5t | ||
H24/H34 | >0.2-0.5 | ≥340-400 | ≥250 | 4 | 1.0t | ||
>0.5-1.5 | 5 | 2.0t | |||||
>1.5-3.0 | 6 | 2.5t | |||||
>3.0-6.0 | 7 | 3.5t | |||||
H26/H36 | >0.2-0.5 | ≥360-420 | ≥280 | 2 | |||
>0.5-1.5 | 3 | ||||||
>1.5-3.0 | 3 | ||||||
>3.0-4.0 | 3 | ||||||
H112 | >6.0-12.5 | ≥275 | ≥125 | 12 | |||
>12.5-40 | ≥275 | ≥125 | 10 | ||||
>40-50 | ≥270 | ≥115 | 10 | ||||
F | >4.5-150 |
5083 aluminum sheet
Our packing meets the sea export standard.
PE/PVC protective film or white paper could be covered as customer’s need.
Special requirements of packing could be negotiate before order.
5083 aluminum sheet
Our packing meets the sea export standard.
PE/PVC protective film or white paper could be covered as customer’s need.
Special requirements of packing could be negotiate before order.
5083 aluminum sheet
5083aluminum sheet belongs to Al-Mg-Si aluminum alloys.
Its main contents are Magnesium and Silicon except Aluminum. Over 4.0% of Magnesium enables 5083 aluminum plate to have excellent resistance to correction, and easily to weld.
By adding cooper, 5083 aluminum plate has 28% Electrical conductivity.
5083 aluminum plate also has good forming characteristic for either hot or cold working. But hardening is accomplished by means of cold working only.
Besides, 5083 aluminum plate does have good strength but non-heat treatable.
5083 aluminum plate has vast applications for its properties above. It is commonly used in the manufacture of marine, auto aircraft cryogenics, storage tank, railway cars, coachwork, armor plate, building construction, pressure vessels, etc.
5083 aluminum sheet
5083aluminum sheet belongs to Al-Mg-Si aluminum alloys.
Its main contents are Magnesium and Silicon except Aluminum. Over 4.0% of Magnesium enables 5083 aluminum plate to have excellent resistance to correction, and easily to weld.
By adding cooper, 5083 aluminum plate has 28% Electrical conductivity.
5083 aluminum plate also has good forming characteristic for either hot or cold working. But hardening is accomplished by means of cold working only.
Besides, 5083 aluminum plate does have good strength but non-heat treatable.
5083 aluminum plate has vast applications for its properties above. It is commonly used in the manufacture of marine, auto aircraft cryogenics, storage tank, railway cars, coachwork, armor plate, building construction, pressure vessels, etc.
© 2022 Zhejiang Yonghong New Material Co., Ltd.